תיאור
D Series – High Flow
MOPD: 900 PSI (62 Bar)
CV Range: 0.045 to 0.880 (KV Range: 0.038 to 0.748)
10 Watts
For maximum flow in a miniature solenoid valve the D Series valves delivers a wide
range of CV (KV ) values and maximum operating pressures. The D Series is also
available in multiple body materials, seal materials, coil constructions, voltages, and
wattages. Proven to perform for millions of cycles without failure, the D valve—as
with the entire valve series—is ideal for manifold configurations, sub-assemblies, and
complete fluidic systems. The D Series is the largest in a progression—A Series, B
Series, and C Series—of the highly flexible, modular design, (general purpose) valves.
Typical Applications
• Agriculture
• Defense
• Sterilization Equipment
• Industrial Automation
2 Coil Construction
(blank) =Tape-wrapped, Class B, with 18˝ (45.7cm) lead wires*
W__ =Tape-wrapped coil, lead wires, non-standard length
(specify in inches)
1 =Encapsulated coil, Class B, lead wires
3 =Encapsulated coil, Class H, lead wires
4 =Encapsulated coil, Class B, 1/4˝ (6.35mm) spade terminals
10 =Externally rectified coil, AC Voltages (lead-wires only)
11 =Tape-wrapped coil, Class H, lead wires
HC =Encapsulated coil, Class B, EN175301-803 Style A,
Industrial, 18mm, 2+1 poles
HC2 =Encapsulated coil, Class B, EN175301-803 Style C,
Industrial, 9.4mm, 2+1 poles
3 Body Material
(blank) =303 Stainless Steel*
BB =Brass
SB5 =316 Stainless Steel
4 Plunger Seal Material
(blank) =Nitrile*
E =EPR
GV =Gasoline Viton® – 2-way normally open and 3-way valves
max. orifice = 3/32˝ (2.38mm)
N =Neoprene – 2-way normally closed valves only,
max. orifice = 1/4˝ (6.35mm)
NS =Nitrile – NSF/FDA, max. orifice = 1/4˝ (6.35mm)
PF =Perfluoroelastomer – max. orifice = 1/4˝ (6.35mm)
R =Rulon® – 2-way normally closed valves only,
max. orifice = 1/4˝ (6.35mm)
T =PTFE – max. orifice = 1/4˝ (6.35mm)
V =Viton®
5 O-Ring Material
(blank) =Nitrile*
EO =EPR
NO =Neoprene
NSO =Nitrile (NSF/FDA, 2-way valves only)
PFO =Perfluoroelastomer
TO =PTFE
VO =Viton®
6 Body Port Configuration
(blank) =1/4-18 NPT female thread*
LC =1/8-27 NPT female thread – max. orifice = 5/16˝ (7.94mm)
LD =3/8-18 NPT female thread
LT =1/8-28 BSPT female thread – max. orifice = 5/16˝ (7.94mm)
LU =1/4-19 BSPT female thread
MM =Manifold mount – 1/2-20 UNF-2A mounting stud,
max. orifice = 1/4˝ (6.35mm)††
OB =Omit body (operator style)
BI =Bottom over-seat port, female thread
– max. orifice = 1/4˝ (6.35mm)
BO =Bottom under-seat port, female thread
7 Voltage
(see note below)
C203 =12 VDC
C204 =24 VDC
C301 =120/50/60R (add Coil Option -10)
C303 =240/50/60R (add Coil Option -10)
___VDC =DC (specify voltage)
___VAC =AC (specify voltage; includes copper shading ring)
8 Additional Options
WM =Mounting bracket on the coil housing
TP =PTFE coated plunger
CP =Chamfered plunger
S =Silver shading ring
OC =Cleaned for oxygen use
VAC =Vacuum application – 0 to 29.5˝ Hg (0 to 1000mBar)
G5 =One piece 316 Stainless Steel guide assembly