C-LEVER direct is the result of the permanent improvement of innovative REMBE technologies. In close cooperation with the University of Applied Science in Düsseldorf, the C-LEVER measurement procedure has been optimised to be an extremely precise and absolutely reliable measuring system for bulk and solids. The consistent pursuit of the goals that were set has led to a measurement procedure based on centrifugal force that is unique throughout the world.
Accurate Flow Rating with Different Bulk Densities.
The C-LEVER direct flow meter is characterised by the highest of measurement accuracy. The various series are suited to the widest variety of applications – from truck pre-loading to controlling and dosing tasks in the bulk goods processing industry. The compact design and the low overall height enable space-saving applications.
The C-LEVER principle is based on the laws of centripetal force. We have used this principle for the development of a very accurate, bulk density independent, friction-compensated process. An accuracy of up to 0.5%* can be achieved even with completely different properties of the bulk goods. The bulk and solids that are fed via special intake with optimum feed point are diverted over a radial-shaped sensor surface. According to Newton, a counter-acting centripetal force, directed towards the centre of the same magnitude as the outward centrifugal force is created by this radial movement, thus keeping the bulk product on its circular path. In the case of this optimum sensor arrangement of the C-LEVER, the counter-acting force corresponds to the centripetal one, which has an absolutely linear relationship with the throughput and is measured by means of a special, friction-compensated force sensor reducing time.
Fast and Inexpensive Installation
The flange of the C-LEVER direct is adapted to any connection of your choice. Various standard connections are available. Non-standard connections such as clamps are also possible on request. The scales themselves are simply installed in a vertical conveying section. Thanks to the low installation height of between 360 mm (14.17 in) and 700 mm (26.70 in), installation is fast and inexpensive. The system accuracy of ±2% is achievable immediately. In the case of authorised product feed provided by the customer or through a REMBE intake, a maximum accuracy of 0.5% is achieved. For the purposes of quality assurance, the measurement accuracy of the scale is quickly checked at a later time with a calibration weight.
- Friction Compensation Technology (FCT): The system with neither drive mechanism nor other mechanically moving parts meaning less maintenance
- Measurement accuracy is independent of bulk density
- Intelligent sensor arrangement ensures great stability of the zero point in the event of adhesion
- Dustproof housing guarantees flow to continue even when the system is switched off during installation